ThinList Blog: 2009-06-07

Saturday, June 13, 2009

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

With Tricerat Screwdrivers the client can not be older than the server version installed…With that said you have two options….Downgrade the server back to V3 or update your clients to V4…..Let us know if installing V4 client corrects your issue….

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Heflin, Janet
Sent: Friday, June 12, 2009 10:04 AM
To: thin@freelists.org
Subject: [THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

I have created no policies

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Joe Shonk
Sent: Friday, June 12, 2009 9:45 AM
To: thin@freelists.org
Subject: [THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

In the PSMC check to see if you have a Policy enable to close off the OEM virtual channel.

Joe

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Heflin, Janet
Sent: Friday, June 12, 2009 6:49 AM
To: thin@freelists.org
Subject: [THIN] FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

A little more information.

I installed the Simplified (Screwdriver) version 4 for the server.

At the time users had the Screwdriver version 3 and could not print at all.

Is there something in the new Presentation server that must be turned on / enable for Tricerat printing? And if so where?

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Heflin, Janet
Sent: Thursday, June 11, 2009 3:19 PM
To: thin@freelists.org
Subject: [THIN] Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 adn Citrix Presentation server 4.5

I am very new at Citrix so point me in the direction of where to check this and I will

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Joe Shonk
Sent: Thursday, June 11, 2009 3:00 PM
To: thin@freelists.org
Subject: [THIN] Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 adn Citrix Presentation server 4.5

Are the OEM channels open in the CTX Policies?

Joe

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Heflin, Janet
Sent: Thursday, June 11, 2009 12:34 PM
To: thin@freelists.org
Subject: [THIN] Tricerat ScrewDriver printer v4, Citrix web client 11.0 adn Citrix Presentation server 4.5

I am currently on Presentation Server 4.5 rollup 4 with Web client version 11.0.

I have installed the Tricerat Server 4 on my Presentation server and test my access my application through the 11.0 web client with no problems.

I installed the Tricerat full version of ScrewDriver v4 and now when I click on an application through the 11.0 web client I receive the following error.

Does anyone have a solution?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Janet Heflin
Information Technology
T.D. Williamson, Inc.
Phone: (918) 447-5168
Email: janet.heflin@tdwilliamson.com
Help Desk Phone: (918) 447-5222
Help Desk Email: helpdesk@tdwilliamson.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This message and any attachments may be a confidential attorney-client communication or otherwise be privileged and confidential. If you are not the intended recipient, any review, distribution or copying of this transmittal is prohibited. If you have received this transmittal in error, please reply by e-mail and delete this message and all attachments

Friday, June 12, 2009

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

Has anyone ever installed Tricerat 4 on a Citrix 4.5 server and installed the 4.0 tricerat client? I believe this is a security issue but not sure where to look

I have created no policies

In the PSMC check to see if you have a Policy enable to close off the OEM virtual channel.

Joe

A little more information.

I installed the Simplified (Screwdriver) version 4 for the server.

At the time users had the Screwdriver version 3 and could not print at all.

Is there something in the new Presentation server that must be turned on / enable for Tricerat printing? And if so where?

I am very new at Citrix so point me in the direction of where to check this and I will

Are the OEM channels open in the CTX Policies?

Joe

I am currently on Presentation Server 4.5 rollup 4 with Web client version 11.0.

I have installed the Tricerat Server 4 on my Presentation server and test my access my application through the 11.0 web client with no problems.

I installed the Tricerat full version of ScrewDriver v4 and now when I click on an application through the 11.0 web client I receive the following error.

Does anyone have a solution?

[THIN] Re: Remote Desktop Users

Also check to be sure the server is not disabled and that the server is still a member of the published app.

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Michel Roth
Sent: Friday, June 12, 2009 9:57 AM
To: thin@freelists.org
Subject: [THIN] Re: Remote Desktop Users

Make sure TS licensing is fully running and functional.

On Fri, Jun 12, 2009 at 3:49 PM, Jeff Pitsch <jepitsch@gmail.com> wrote:

Ok suddenly users on one server are not allowed to log in because the server says they do not belong to the remote desktop user group. I have check the RDS group and the correct groups belong. I have checked ICA-TCP permissions and they are good. I have checked user rights assignment and RDS belongs to the allow logon to TS. I cannot see any reason they should not be able to login. Anyone have any ideas?

--
Kind Regards,
Michel Roth
Thincomputing.net

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

I have created no policies

In the PSMC check to see if you have a Policy enable to close off the OEM virtual channel.

Joe

A little more information.

I installed the Simplified (Screwdriver) version 4 for the server.

At the time users had the Screwdriver version 3 and could not print at all.

Is there something in the new Presentation server that must be turned on / enable for Tricerat printing? And if so where?

I am very new at Citrix so point me in the direction of where to check this and I will

Are the OEM channels open in the CTX Policies?

Joe

I am currently on Presentation Server 4.5 rollup 4 with Web client version 11.0.

I have installed the Tricerat Server 4 on my Presentation server and test my access my application through the 11.0 web client with no problems.

I installed the Tricerat full version of ScrewDriver v4 and now when I click on an application through the 11.0 web client I receive the following error.

Does anyone have a solution?

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

In the PSMC check to see if you have a Policy enable to close off the OEM virtual channel.

Joe

A little more information.

I installed the Simplified (Screwdriver) version 4 for the server.

At the time users had the Screwdriver version 3 and could not print at all.

Is there something in the new Presentation server that must be turned on / enable for Tricerat printing? And if so where?

I am very new at Citrix so point me in the direction of where to check this and I will

Are the OEM channels open in the CTX Policies?

Joe

I am currently on Presentation Server 4.5 rollup 4 with Web client version 11.0.

I have installed the Tricerat Server 4 on my Presentation server and test my access my application through the 11.0 web client with no problems.

I installed the Tricerat full version of ScrewDriver v4 and now when I click on an application through the 11.0 web client I receive the following error.

Does anyone have a solution?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Janet Heflin
Information Technology
T.D. Williamson, Inc.
Phone: (918) 447-5168
Email: janet.heflin@tdwilliamson.com
Help Desk Phone: (918) 447-5222
Help Desk Email: helpdesk@tdwilliamson.com
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[THIN] Re: Remote Desktop Users

Run lsview.exe (w2k3 resource kit) and see what license server it shows, if any.

Joe

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Jeff Pitsch
Sent: Friday, June 12, 2009 7:18 AM
To: thin@freelists.org
Subject: [THIN] Re: Remote Desktop Users

I've recreated the listener, I've even added the domain user group directly to the allow log on through TS and to the ICA-TCP listener. Now I'm even more confused on what is happening.

On Fri, Jun 12, 2009 at 10:06 AM, Jeff Pitsch <jepitsch@gmail.com> wrote:

RSOP shows as fine. Nothing being applied to that user right.

licensing is fine, no errors.

On Fri, Jun 12, 2009 at 9:56 AM, Adam Thompson <adwulf@gmail.com> wrote:

What does rsop.msc or gpresult show for:

Computer Configu\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\Allow log on through TS

?

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:

> Ok suddenly users on one server are not allowed to log in because the server
> says they do not belong to the remote desktop user group. I have check the
> RDS group and the correct groups belong. I have checked ICA-TCP permissions
> and they are good. I have checked user rights assignment and RDS belongs to
> the allow logon to TS. I cannot see any reason they should not be able to
> login. Anyone have any ideas?

--
AdamT
If Carlsberg tasted nice it would probably be the best lager in the world.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] Re: Remote Desktop Users

to add to the confusion on this: The users typically launch this desktop through an ica file that was created from a published application. It has worked for a month or two already. If th eica file is launched the RDS error pops up. If I launch it through WI the app launches fine.

Weirder and weirder

On Fri, Jun 12, 2009 at 10:19 AM, Adam Thompson <adwulf@gmail.com> wrote:

Only other things I can think of:

The "Deny Logon through TS" setting in rsop

If you're in a multi domain forest, is there a GC DC available, and is
the Infrastructure Master DC running OK? Any errors in the eventlogs
about resolving SIDs and GUIDs?

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
> RSOP shows as fine. Nothing being applied to that user right.
>
> licensing is fine, no errors.
>
> On Fri, Jun 12, 2009 at 9:56 AM, Adam Thompson <adwulf@gmail.com> wrote:
>>
>> What does rsop.msc or gpresult show for:
>>
>> Computer Configu\Windows Settings\Security Settings\Local
>> Policies\User Rights Assignment\Allow log on through TS
>>
>> ?
>>
>> 2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
>> > Ok suddenly users on one server are not allowed to log in because the
>> > server
>> > says they do not belong to the remote desktop user group. I have check
>> > the
>> > RDS group and the correct groups belong. I have checked ICA-TCP
>> > permissions
>> > and they are good. I have checked user rights assignment and RDS
>> > belongs to
>> > the allow logon to TS. I cannot see any reason they should not be able
>> > to
>> > login. Anyone have any ideas?
>>
>>
>>
>> --
>> AdamT
>> If Carlsberg tasted nice it would probably be the best lager in the world.
>> ************************************************
>> For Archives, RSS, to Unsubscribe, Subscribe or
>> set Digest or Vacation mode use the below link:
>> http://www.freelists.org/list/thin
>> Follow ThinList on Twitter
>> http://twitter.com/thinlist
>> Thin List discussion is now available in blog format at:
>> http://thinmaillist.blogspot.com
>> Thinlist MOBILE Feed
>> http://thinlist.net/mobile
>> ************************************************
>
>

--

AdamT
If Carlsberg tasted nice it would probably be the best lager in the world.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] Re: Remote Desktop Users

Only other things I can think of:

The "Deny Logon through TS" setting in rsop

If you're in a multi domain forest, is there a GC DC available, and is
the Infrastructure Master DC running OK? Any errors in the eventlogs
about resolving SIDs and GUIDs?

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
> RSOP shows as fine. Nothing being applied to that user right.
>
> licensing is fine, no errors.
>
> On Fri, Jun 12, 2009 at 9:56 AM, Adam Thompson <adwulf@gmail.com> wrote:
>>
>> What does rsop.msc or gpresult show for:
>>
>> Computer Configu\Windows Settings\Security Settings\Local
>> Policies\User Rights Assignment\Allow log on through TS
>>
>> ?
>>
>> 2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
>> > Ok suddenly users on one server are not allowed to log in because the
>> > server
>> > says they do not belong to the remote desktop user group. I have check
>> > the
>> > RDS group and the correct groups belong. I have checked ICA-TCP
>> > permissions
>> > and they are good. I have checked user rights assignment and RDS
>> > belongs to
>> > the allow logon to TS. I cannot see any reason they should not be able
>> > to
>> > login. Anyone have any ideas?
>>
>>
>>
>> --
>> AdamT
>> If Carlsberg tasted nice it would probably be the best lager in the world.
>> ************************************************
>> For Archives, RSS, to Unsubscribe, Subscribe or
>> set Digest or Vacation mode use the below link:
>> http://www.freelists.org/list/thin
>> Follow ThinList on Twitter
>> http://twitter.com/thinlist
>> Thin List discussion is now available in blog format at:
>> http://thinmaillist.blogspot.com
>> Thinlist MOBILE Feed
>> http://thinlist.net/mobile
>> ************************************************
>
>

[THIN] Re: Remote Desktop Users

I've recreated the listener, I've even added the domain user group directly to the allow log on through TS and to the ICA-TCP listener. Now I'm even more confused on what is happening.

On Fri, Jun 12, 2009 at 10:06 AM, Jeff Pitsch <jepitsch@gmail.com> wrote:

RSOP shows as fine. Nothing being applied to that user right.

licensing is fine, no errors.

On Fri, Jun 12, 2009 at 9:56 AM, Adam Thompson <adwulf@gmail.com> wrote:

What does rsop.msc or gpresult show for:

Computer Configu\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\Allow log on through TS

?

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:

> Ok suddenly users on one server are not allowed to log in because the server
> says they do not belong to the remote desktop user group. I have check the
> RDS group and the correct groups belong. I have checked ICA-TCP permissions
> and they are good. I have checked user rights assignment and RDS belongs to
> the allow logon to TS. I cannot see any reason they should not be able to
> login. Anyone have any ideas?

--
AdamT
If Carlsberg tasted nice it would probably be the best lager in the world.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] Re: Remote Desktop Users

RSOP shows as fine. Nothing being applied to that user right.

licensing is fine, no errors.

On Fri, Jun 12, 2009 at 9:56 AM, Adam Thompson <adwulf@gmail.com> wrote:

What does rsop.msc or gpresult show for:

Computer Configu\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\Allow log on through TS

?

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:

> Ok suddenly users on one server are not allowed to log in because the server
> says they do not belong to the remote desktop user group. I have check the
> RDS group and the correct groups belong. I have checked ICA-TCP permissions
> and they are good. I have checked user rights assignment and RDS belongs to
> the allow logon to TS. I cannot see any reason they should not be able to
> login. Anyone have any ideas?

--
AdamT
If Carlsberg tasted nice it would probably be the best lager in the world.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] Re: Remote Desktop Users

Ignore me... you've already checked that, I just haven't had
sufficient coffee yet today.

2009/6/12 Adam Thompson <adwulf@gmail.com>:
> What does rsop.msc or gpresult show for:
>
> Computer Configu\Windows Settings\Security Settings\Local
> Policies\User Rights Assignment\Allow log on through TS
>
> ?
>
> 2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
>> Ok suddenly users on one server are not allowed to log in because the server
>> says they do not belong to the remote desktop user group. I have check the
>> RDS group and the correct groups belong. I have checked ICA-TCP permissions
>> and they are good. I have checked user rights assignment and RDS belongs to
>> the allow logon to TS. I cannot see any reason they should not be able to
>> login. Anyone have any ideas?
>
>
>
> --
> AdamT
> If Carlsberg tasted nice it would probably be the best lager in the world.
>

[THIN] Re: Remote Desktop Users

What does rsop.msc or gpresult show for:

Computer Configu\Windows Settings\Security Settings\Local
Policies\User Rights Assignment\Allow log on through TS

2009/6/12 Jeff Pitsch <jepitsch@gmail.com>:
> Ok suddenly users on one server are not allowed to log in because the server
> says they do not belong to the remote desktop user group. I have check the
> RDS group and the correct groups belong. I have checked ICA-TCP permissions
> and they are good. I have checked user rights assignment and RDS belongs to
> the allow logon to TS. I cannot see any reason they should not be able to
> login. Anyone have any ideas?

[THIN] Re: Remote Desktop Users

Make sure TS licensing is fully running and functional.

On Fri, Jun 12, 2009 at 3:49 PM, Jeff Pitsch <jepitsch@gmail.com> wrote:

Ok suddenly users on one server are not allowed to log in because the server says they do not belong to the remote desktop user group. I have check the RDS group and the correct groups belong. I have checked ICA-TCP permissions and they are good. I have checked user rights assignment and RDS belongs to the allow logon to TS. I cannot see any reason they should not be able to login. Anyone have any ideas?

--
Kind Regards,
Michel Roth
Thincomputing.net

[THIN] Remote Desktop Users

[THIN] FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

A little more information.

I installed the Simplified (Screwdriver) version 4 for the server.

At the time users had the Screwdriver version 3 and could not print at all.

Is there something in the new Presentation server that must be turned on / enable for Tricerat printing? And if so where?

I am very new at Citrix so point me in the direction of where to check this and I will

Are the OEM channels open in the CTX Policies?

Joe

I am currently on Presentation Server 4.5 rollup 4 with Web client version 11.0.

I have installed the Tricerat Server 4 on my Presentation server and test my access my application through the 11.0 web client with no problems.

I installed the Tricerat full version of ScrewDriver v4 and now when I click on an application through the 11.0 web client I receive the following error.

Does anyone have a solution?

[THIN] Re: XenApp and Metaframe

Do your clients connect using UDP broadcast?

Are they older thin clients?

Are you using Web Interface or PNAgent? Or do all of the clients use Program Neighborhood?

On Fri, Jun 12, 2009 at 3:06 AM, Hamilton, Ronnie <ronnie.hamilton@ltai.ie> wrote:

Hi ,

I build a XenApp test farm last night just one server to start testing etc…

When I landed in work this morning non one could connect to the old XP Metaframe farm, the minute I shut down the new XenApp server all connected with no issues.

I was under the impression that the two farms could run on the same network /subnet using same AD etc with no issues so that an in place migration can take place.

Am I missing something simple here?

Thanks

Ronnie

Visit our website : www.ltai.ie

__________________________________________

Lufthansa Technik Airmotive Ireland Limited. Registered in Ireland. Reg. No. 45999. Registered Office: Naas Road, Rathcoole, Co.Dublin.

Lufthansa Technik Airmotive Ireland Leasing Limited. Registered in Ireland. Reg. No. 140891. Registered Office: Naas Road, Rathcoole, Co.Dublin.

__________________________________________

This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please advise by return email and delete all copies of the message.

[THIN] Re: IE8 breaks Folder Options in Windows 2008

Yes, I am the admin. And BTW this is a Windows 2008 SP2 server.

I've seen posts on the web about Vista, but I have not experienced this problem on my Vista machine at home.

_______________________________
Hector Minero
NSWCDD K55
Ph:(540)653-8859

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Jim Kenzig
Sent: Thursday, June 11, 2009 2:59 PM
To: thin@freelists.org
Subject: [THIN] Re: IE8 breaks Folder Options in Windows 2008

And I am assuming you are admin of the machine... I've started seeing some strangeness with UAC again in Vista since some updates. Is that still turned on or have you disabled it?
Jim Kenzig
Blog: http://www.techblink.com
Twitter: http://twitter.com/kenzig

On Thu, Jun 11, 2009 at 2:30 PM, Minero, Hector B CIV NSWCDD, K55 <hector.minero@navy.mil> wrote:

That's exactly what I'm doing.

This system is not connected to the Internet. Maybe there is an update that I'm missing. I'll move all the updates to the isolated network and try to update it.

However, I've seen this reported on the web, so I'm not the only one.

_______________________________
Hector Minero

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Jim Kenzig
Sent: Thursday, June 11, 2009 2:01 PM
To: thin@freelists.org
Subject: [THIN] Re: IE8 breaks Folder Options in Windows 2008

Where are you setting it? Choose My Computer click on the C drive to bring up explorer. Hit the Alt key to show the file menu, choose tools, click on Folder Options Check the open each folder in same window and go to the View Tab and click the apply to all folders button. Should work. I havent seen this.
Jim Kenzig
Blog: http://www.techblink.com
Twitter: http://twitter.com/kenzig

On Thu, Jun 11, 2009 at 12:56 PM, Minero, Hector B CIV NSWCDD, K55 <hector.minero@navy.mil> wrote:

I just installed IE on Windows 2008 SP2 and now when I double-click on folders in Explorer, they all show in a separate windows.

It does not matter that I set the "Open each folder in the same window". I did a quick search on the web and apparently it happens to Vista as well, but could not find anything that solves the problem.

Does anyone know how to fix this? Uninstalling IE 8 not an option.

Thanks,

_______________________________
Hector Minero
NSWCDD K55
Ph:(540)653-8859

ThinList Blog

Saturday, June 13, 2009

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

Friday, June 12, 2009

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

[THIN] Re: Remote Desktop Users

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

[THIN] Re: FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Re: Remote Desktop Users

[THIN] Remote Desktop Users

[THIN] FW: Re: Tricerat ScrewDriver printer v4, Citrix web client 11.0 and Citrix Presentation server 4.5

[THIN] Re: XenApp and Metaframe

[THIN] Re: IE8 breaks Folder Options in Windows 2008

About Me

Blog Archive