Friday, March 20, 2009

[THIN] Re: help on citrix PS 4

Shiva,

The load evaluator is a component of all Presentation Server editions.
If you don't assign a custom load evaluator to your servers, then the servers use the default load evaluator that is automatically configured during Presentation Server installation.
The load evaluator decides when a server reports full load (equals a qfarm /load value of 10000).

Have a read of these articles for info on Presentation Server load management:


On Mar 20, 2009, at 3:01 PM, Shankar, Shiva wrote:

We are running HP c7000 blade server  CPU E5345 2.33  2 CPUS, with 16 GB Ram 142 GB storage,
We don't  have any load evaluator software.
 
When i type qfarm/load I can see my three server's with server load 300, 100 , 200
 
Please advice further & thanks your all help J.
 
 
Thanks & Regards,
 
Shiva Shankar S | Senior System Engineer, Asia Pacific
phone +65 6511 9241 | Fax +65 6274 9930
3 Harbourfront Place | #08-03 HarbourFront Tower
<image001.gif>
 
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Joe Shonk
Sent: Friday, March 20, 2009 11:48 AM
To: thin@freelists.org
Subject: [THIN] Re: help on citrix PS 4
 
What kind of servers? Memory, CPU, etc.  What edition of PS4.0?  What load evaluator are you using?  When there are 15 people, goto a dos prompt and type QFARM /load     What is that number?
 
Joe
 
 
Keeping in mind that PS 4.0 End of Maintenance is Jun 09 and EOL is Dec 09.
 
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Shankar, Shiva
Sent: Thursday, March 19, 2009 8:34 PM
To: thin@freelists.org
Subject: [THIN] help on citrix PS 4
 
Hello ,
 
I'm very new to citrix environment, Just I installed the Citrix server PS 4.0 on windows 2003 with R2 now we are going to install few application on this Citrix to publish ( desktop & appellation), before that I wanted to fine tune the server to support at least min 40 users on this server , users are accessing this serve from  WyseTerms S10
 
Please help me what the steps we need to carry before this server go into production & what are the hot fix I should install where I can get the hot fix & where are the reg changes I need to do.
 
Will wait for your updates.
 
Thanks & Regards,
 
Shiva shankar
 

-- 
This message has been scanned for viruses and 
dangerous content by MailScanner, and is 
believed to be clean.


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
Posted by thinlist at 12:14 AM

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)