Sounds promising.. Will the existing Web Interface Server/Presentation servers be affected if I build a new WI server with the latest WI version? Therefore multiple WI servers (with different versions) in the 1 Citrix Farm. Obviously the WI and PNAgent addresses will be different from the Production ones. Im assuming its a simple DNS change to then allow the Production users to use the new Web Interfaces or is there more to it?
Thanks
Ang
From: scanjam@hotmail.com
To: thin@freelists.org
Subject: [THIN] Re: 1 x Web Interface servicing multiple Citrix 4.0 Farms over WAN
Date: Mon, 22 Jun 2009 10:27:40 +1000
Angela,
Not sure on the doco, you could try the Admin Guides?? But heres some further ideas. . .
We run 1 Web Interface and 2 Citrix Farms, (a migration project still underway .. sigh) the user sees all applications from both farms for which that user has access to (ie if user has MS Access published to his user name from both farms the user will see the MSAccess icon twice)
You can configure "Zone preference and failover" as a policy for the citrix server sites so users that connect from IP Range X (canada) always connect canada servers firstly (and if it all goes pear shaped you can even configure a backup site so users connect to another site as a secondary) and then vice versa..
Not so sure on the WI speeds, but have avoided using V5 because its such a "cosmetic" change for the end users. and they will mostly get confused if the page changes from Red to Green. . =)
We are running Wi 4.5.1.
Hope this helps a little :-)
James
From: angela_smith9@hotmail.com
To: thin@freelists.org
Subject: [THIN] Re: 1 x Web Interface servicing multiple Citrix 4.0 Farms over WAN
Date: Mon, 22 Jun 2009 10:05:46 +1000
Hi
Where can I find good documentation on setting this up? How does WI know what farm a user belongs to? If I have a CTX Farm in US and another in Canada. A US User logs in, how does he get directed to the US Farm? Is it based on IP, AD group? Are there different links on the WI page?
Also in relation to Citrix WI versions, is it always best to go with the latest and greatest? I recall reading that WI 4.6 is faster than V5? My farm is version 4 so I need to ensure the version works with this old version.
Sorry for the silly question but Ive never done this before.
Angela
Subject: [THIN] Re: 1 x Web Interface servicing multiple Citrix 4.0 Farms over WAN
From: steveg@thinclient.net
Date: Sat, 20 Jun 2009 21:07:13 +0000
You can include multiple farms in a single web interface. In the settings within WI just specify more than one farm and define one or more servers within the farm for app enumeration.
In a distributed environment you gave to look at AD and WAN communications but WI is not a limiting factor, in fact, it is deosgned to aggragate mutilple farms.
Steve Greenberg
Sent via BlackBerry by AT&T
From: ananth padmanabham
Date: Sat, 20 Jun 2009 08:42:56 -0700 (PDT)
To: <thin@freelists.org>
Subject: [THIN] Re: 1 x Web Interface servicing multiple Citrix 4.0 Farms over WAN
| Hi I think you need to create new web sites for each farm in Single Citrix web interface servers and make sure that communication between the servers should happen to each farm. U should have a 2 web interface for load balancing and fault tollance purpose. Anantha Padmanabham K --- On Fri, 19/6/09, Angela Smith <angela_smith9@hotmail.com> wrote:
|
Cricket on your mind? Visit the ultimate cricket website. Enter now!
Click Here View photos of singles in your area
Make ninemsn your homepage! Get the latest news, goss and sport
Make ninemsn your homepage! Get the latest news, goss and sport
No comments:
Post a Comment