Thursday, December 4, 2008

[THIN] Re: Dual ZDCs?

Hi Jeremy,

Thanks for your suggestions.  I checked out a few things yesterday after speaking with a more senior Admin who has been on vacation.  In some ways he confused me even more trying to tell me that when you build the farm you designate the zone masters (2 in our case supposedly, when to me it just seems like a primary of most preferred and a backup of preferred) and that that info is stored in the imalhc.mdb (copy of persistent, not non-persistent data) on each server telling it to only communicate with the ZM in that database.  He also explained how the member server communicates with the ZM via the MGT NIC then the ZM sends the info back on the client-side NIC thus it's only able to send back to the same member server.  I find flaws with both of these explanations but I think you're right that the answer to my question lies in our configuration.  One thing I did find is that we don't have ports 2512, 2513 or 1494 open between non ZM servers, only from member server to ZM.  That would seem to account more for the lack of available info in the CMs.

I started questioning this b/c I am studying for my CCA.  The more you learn the more you can question.  Anyhow, I will just keep digging into this.  Thanks for your clarifications.

Best Regards,

Stephanie

Jeremy Saunders <Jeremy.Saunders@datacom.com.au> wrote:
Hi Stephanie,
 
Have a look at the way the Presentation Server Administrators have been set up in the Access Management Console, and perhaps also the DCOM permissions on the servers, ensuring that the COM Plus network access Windows component has been added to all servers. As far as I'm concerned, this stuff should configured the same across all servers. Maybe you need to quiz that Engineer a bit further???
 
Cheers,
Jeremy.
 
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Stephanie Atkinson
Sent: Wednesday, December 03, 2008 8:23 PM
To: thin@freelists.org
Subject: [THIN] Re: Dual ZDCs?
 
I'd forgotten the qfarm identifies the ZM as well.  I ran that and it confirmed just 1 ZM is in affect.  So then here is where I guess I am confused.  You stated,

By the way, it is not a requirement to run the Access Management Console or Presentation Server Console (AKA CMC) from the Data Collector. Any farm server will do, and if your zone is working correctly, the information returned will be consistent no matter which server you connect to.

and when I read that ports 2512 and 2513 are used for server to server and server to MC respectively, I took that to mean that all MCs from all servers in a given farm provide results for all servers in the farm. In our case, it is only the dedicated primary and backup ZMs that have this bird's eye view for Servers.  The MCs from any other server DO provide Pub App and Policies data for example but NOT Servers.  So you can't see what users are logged on, try to shadow or directly connect to any other server than the one you are logged on to. 

Regards,

Stephanie



Jeremy Saunders <Jeremy.Saunders@datacom.com.au> wrote:
Hi Stephanie,
 
What you are seeing is correct, it obviously just hasn't been explained to you correctly. The Engineer should have whiteboarded this for you.
 
Each zone can only have ONE Data Collector at any one time. You have a "Primary", which will always be the server set to "Most Preferred", and you have a Backup, which is set to "Preferred". The backup will take over when the Primary fails, is taken off-line, etc. I personally always set the remainder of farm member servers to "Not Preferred" to ensure they never take part in any zone elections. Others will leave them set to "Default", just in case.
 
If you go to the command line on any server, type "qfarm". This will list all servers in the farm. The ones with the D after their IP Address will be the active Data Collectors for those zones. So in your case you will see two.
 
By the way, it is not a requirement to run the Access Management Console or Presentation Server Console (AKA CMC) from the Data Collector. Any farm server will do, and if your zone is working correctly, the information returned will be consistent no matter which server you connect to.
 
I hope that explains it.
 
Cheers,
Jeremy.
 
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Stephanie Atkinson
Sent: Wednesday, December 03, 2008 9:58 AM
To: thin@freelists.org
Subject: [THIN] Dual ZDCs?
 
How is it that a Zone can have 2 operating Data Collectors?  Of everything I have read, each zone can only have one so maybe I misunderstand what is going on.  The Citrix Engineer who setup this environment advised we have data collection on 2 servers because 1 is set to Most Preferred and the other Preferred.  All other servers are left to default. We have 2 dedicated servers for each zone intended to be data collectors and by all accounts that is how they are working.  All the information from every server in the zone is available from both servers in the CMC; all other servers only provide their local information.
 
Can anyone clarify or explain this?
 
Thanks,
 
Stephanie Atkinson
 
  

Confidentiality and Privilege Notice
This document is intended solely for the named addressee.  The information contained in the pages is confidential and contains legally privileged information. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone, and you should destroy this message and kindly notify the sender by reply email. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you.

 
 

Confidentiality and Privilege Notice
This document is intended solely for the named addressee.  The information contained in the pages is confidential and contains legally privileged information. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not copy or deliver this message to anyone, and you should destroy this message and kindly notify the sender by reply email. Confidentiality and legal privilege are not waived or lost by reason of mistaken delivery to you.


No comments: