[THIN] Re: Secure Gateway 3.0 and Web Interface 4.5.1 question

I have the FQDN for the WI Gateway settings and I have the default access method set to "Gateway Direct". In the configure CSG wizard, I have been accepting the default of "Indirect" and leaving "Installed on this computer" enabled. As I do want the users to enter in the url of the secure gateway....and WI is installed locally.

 

I will go search through more doco.

 

:)

On Thu, Jun 26, 2008 at 5:40 PM, Steve Greenberg <steveg@thinclient.net> wrote:

Sorry, I don't have a CSG install handy to look at. There are two pieces- WI has to have it's DMZ setting to talk in gateway mode to the CSG with the FQDN of the CSG which is the outside public name not the WI site name. Then CSG should have a link value to where it forward to the WI but I don't know which screen that would be on….

 

 

Steve Greenberg

Thin Client Computing

34522 N. Scottsdale Rd D8453

Scottsdale, AZ 85266

(602) 432-8649

www.thinclient.net

steveg@thinclient.net

 

---

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of cherie.watts Watts
Sent: Thursday, June 26, 2008 8:57 AM
To: thin@freelists.org
Subject: [THIN] Re: Secure Gateway 3.0 and Web Interface 4.5.1 question

 

Hi Steve

 

OK, oops on the subject, I meant WI 4.5.1.

 

When you are referring to the value for CSG...do mean this particular screen!! (Attached snap)

 

I have entered the WI address https://blsecure.bl.uk:444/Citrix/AccessPlatform, can't find server.

Tried https://blsecure.bl.uk/Citrix/AccessPlatform no luck either

 

This is all on my testlan.

 

 Thanks for the help

 

 

On Thu, Jun 26, 2008 at 1:56 PM, Steve Greenberg <steveg@thinclient.net> wrote:

What value are you putting in on the CSG for the Web Interface? If you only put the server name or ip address it will launch the default site on IIS. You may have to specify the full path, in the newer web interface it is

 

Servername/Citrix/AccessPlatform

 

I don't remember what 3.51 one was exactly, but something like

 

Servername/Citrix/Metaframe/WebInterface

 

 

Steve Greenberg

Thin Client Computing

34522 N. Scottsdale Rd D8453

Scottsdale, AZ 85266

(602) 432-8649

www.thinclient.net

steveg@thinclient.net

 

---

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of cherie.watts Watts
Sent: Thursday, June 26, 2008 4:46 AM

To: thin@freelists.org
Subject: [THIN] Secure Gateway 3.0 and Web Interface 3.5.1 question

 

Hi Everyone

 

I have just about driven myself crazy trying to configure these.

 

I have no problems connecting with Secure Gateway if Web Interface is installed into the Default website on the IIS server. But if I create it in a new website in IIS and set Web Interface site etc... This all works from the Web Interface links. But Secure Gateway persists in opening the iistart.htm in the default website.

 

I am not sure if it is a config problem in Web Interface or Secure Gateway..

 

What am I doing wrong or not doing?? Please help

 

Thanks

Cherie