[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

I too had problems with Web Interface not seeing the published app after my
4.5 upgrade which included PSE450W2K3R03. Citrix Support had me download
MedEvac which I used to locate a 'damaged' application which was causing the
XML service to send unintelligible information to the Web Interface. Once I
deleted that published application all was well. I was in a mixed 4.0 / 4.5
farm at the time which supposedly contributed to this problem. It is
available here http://support.citrix.com/article/CTX107935

Here is what MedEvac does in its own words:

MedEvac Tool Version 2.5

Created Date: September 20, 2006

Updated Date: September 23, 2008

Description
-----------
The MedEvac tool is utilized to run checks against a Presentation Server
farm to verify environment health.

This tool can be used to check the following components of a Presentation
Server Farm:

1. Verify XML Service Health:

a. Verifies that the XML service is able to respond to an XML, Web
Interface, Program Neighborhood Agent or Program Neighborhood Client
request.

b. Verifies that the XML brokers are able to contact the Data
Collector.

2. Verify Data Collector Health:

a. Verifies Data Collector is able to provide a least loaded server
for the specified application.

b. Verifies IMA Service on the Data Collector is functioning
properly.

c. Verifies the IMA Service can read the Data Collector's LHC.

d. Verifies that the IMA Service can read its Dynamic Store data.

e. Verifies at least one server in the farm has this application
published.

3. Verify least loaded server health:

a. Verifies Term Service on least loaded server.

b. Verifies RPC Service on least loaded server.

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf
Of christopher.walter@cgi.com
Sent: Wednesday, December 24, 2008 9:17 AM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Is your IMA service restarting ok by itself on your data collector and did
you happen to install any packages with IMS before you had this problem? It
almost sounds like the same problem you have when applying R03 for PS 4.5 if
you have corrupted or duplicate jobs only the IMA service would be hung
after.

What do you get if you run dscheck /full servers

Chris

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf
Of Bohmer, Andre ten
Sent: December 24, 2008 2:34 AM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
We use explicit logon default instead of Autologon.

> For the second part of the problem, what do you get back when you run
> dscheck? Did you recently add more groups to your ID's. I had a
> similar problem and we had to do an xml fix to the data collectors in
> order to process accounts that had more then a certain amount of AD
> groups...that was with PS 3.0 though.
No we did not add more groups to all ID's, I use a baseline account and that
did not change but also dos not see all published app's it is granted to.

> dscheck
Data Store Validation Utility. Version: 5.21

Installation Job Information for Unknown Servers
------------------------------------------------
Server 5732 not found for installation job 7cf1-0038-0008513d
Server 1e74 not found for installation job 7cf1-0038-0008513d
Server 5732 not found for installation job 7cf1-0038-0004b7fd
Server 5732 not found for installation job 6157-0038-000d6211
Server 5732 not found for installation job 6157-0038-000d6272

MSI Installation Job Information for Unknown Servers
----------------------------------------------------
No MSI Installation Job Records Found

ADF Installation Job Information for Unknown Servers
----------------------------------------------------
Finished data store validation.

Regards,
Andre

> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf Of Bohmer, Andre ten
> Sent: December 23, 2008 10:57 AM
> To: thin@freelists.org
> Subject: [THIN] After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> Hi,
>
> Tested last week PSE400W2K3R06 on a test server and everything went ok
> so
> rolled out yesterday PSE400W2K3R06 in production (Windows 2003 SP2 , PS
> 4.0
> farm), but now a lot of people only see a few of all published
> applications
> they are granted for (via Program Neighborhood client). WebInterface
> 4.5
> even does not show any application. Looking at the WI servers I found
> following error messages:
>
> "The XML document sent by the Citrix servers could not be processed
> because
> it contains invalid XML. This message was reported from the XML Service
> at
> address "http://<server ip>:80/scripts/wpnbr.dll
> http://com.citrix.xml.NFuseProtocol.RequestAppData". This XML Service
> could
> not be contacted and will be temporarily removed from the list of
> active
> services. Log ID: 2578550e"
>
> And detail from networksnif on WI server:
>
> </AppData>
> <AppData>
> <InName>Exact2;WUR 353</InName>
> <FName&gt;Exact ;WUR 353</FName&gt;
> <Details>
> </Details>
> <SeqNo&gt;1223897127</SeqNo&gt;
> <ServerType>win32</ServerType>
> <ClientType>ica30</ClientType>
> </AppData>
> <AppData>
> <InName>IE</InName>
> 15c
>
> <?xml version="1.0" encoding="UTF-8" ?>
> <!DOCTYPE NFuseProtocol SYSTEM "NFuse.dtd">
> <NFuseProtocol version="4.1">
> <ResponseAppData>;
> <ErrorId>unspecified</ErrorId>
> <MPSError type="IMA">0x80000032</MPSError>
> <BrowserError>0x00000024</BrowserError>
> </ResponseAppData&gt;
> </NFuseProtocol>
>
> Recreating the local host cache is not working. A restore of the data
> store
> before the PSE400W2K3R06 did not work either.
> Any ideas what is the culprit?
>
> Andre
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************