ThinList Blog: 2008

Wednesday, December 31, 2008

[THIN] Re: 100's of XML errors on the WIs

The following was just released for mixed version farms and WI 4.6

http://support.citrix.com/article/CTX118905

Mike
------------------------------

Date: Tue, 30 Dec 2008 19:05:34 -0800 (PST)
From: Mike Piontkowski <citrixpro@yahoo.com>
Subject: [THIN] Re: 100's of XML errors on the WIs

Hi George,

If any of the published applications has a leading or trailing blank space as well as two consecutive spaces in the distinguished name it will generate the error(s) you described.

Email me privately if you have any questions.

Mike
_______________________________

From: <GTaylor@rcrh.org>
Date: Tue, 30 Dec 2008 08:43:52 -0700
Subject: [THIN] 100's of XML errors on the WIs

I have 2 Farms that are serviced by 4 load balanced Web Interfaces, they all answer to the same DNS name. One farm is 4.0 with only 4 servers in it, the other is 4.5 with approx. 35 servers. The WI machines are 4.6. I'm seeing the below message in the application logs of each Web Interface every 5 to 10 minutes:

An error of type "IMA" with an Error ID of "0x80000001" was reported by the XML Service at address "http://rus-ctxpress11s:80/scripts/wpnbr.dll [com.citrix.xml.NFuseProtocol.RequestAppData]". This XML Service transaction failed, but the XML Service has not been removed from the list of active services.

There is one of these for every CPS that is listed as an XML broker. I've tried the following on all the CPS servers via Citrix's Tech Support suggestion with no luck, Cleared the IMA Local Host Cache, unregistered XML, reregistered XML on port 80 and restarted it.

I've also done a dscheck /Full Servers before the above steps and had 1 hostID with no corresponding MfServer node entry. After reloading LHC and reregistering XML I get over 30 of them. I haven't done a /clean with it yet.

Any suggestions on where my issues could be? Does it appear my Datastore is corrupt in some way?

Any help or hints would be great.

George Taylor
Systems Programmer
Regional Health Inc.

[THIN] Re: Office 2003 sp3 and updates etc

Yup. Login to your server and run SET from a command prompt. I had the problem after an application I installed changed the environment variable for Programfiles back to C:\program files. If not there then do a search in your registry for C:\ and see what you come up with.

Chris

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of StGeorge
Sent: December 30, 2008 6:12 PM
To: thin@freelists.org
Subject: [THIN] Office 2003 sp3 and updates etc

Good morning,

I have been updating a single citrix server site over the break with hotfixes and patches etc, I have hit a snag running the Office 2003 sp3 and updates etc.

The server has been remapped to M: and the sp / updates for office baulk on cannot find c:\

Has anyone been able to resolve this quite easily?

I checked the sp3 MSI using /? but no mention of being able to specify the destination location, I also tried using subst which also failed.

Have an excellent new year

Regards

Rob

[THIN] Re: Office 2003 sp3 and updates etc

Yes I can't remember the registry key right off but there is a key under the office 11 hive in the registry that lists the install directory. Just change that to your cd drive letter and put the office CD in and the updates will work Oh found the kb
http://support.microsoft.com/kb/884298 this will fix it.

Jim Kenzig
Blog: http://www.techblink.com

On Tue, Dec 30, 2008 at 6:11 PM, StGeorge <wcsconnect@gmail.com> wrote:

Good morning,
I have been updating a single citrix server site over the break with hotfixes and patches etc, I have hit a snag running the Office 2003 sp3 and updates etc.
The server has been remapped to M: and the sp / updates for office baulk on cannot find c:\

Has anyone been able to resolve this quite easily?
I checked the sp3 MSI using /? but no mention of being able to specify the destination location, I also tried using subst which also failed.
Have an excellent new year

Regards
Rob

[THIN] Re: IE 6 question

I just use VB. Try this, I have problems with sites not working properly in kiosk mode so this is what I use. Just insert your URL in the script and run cscript scriptname.

Set objExplorer = WScript.CreateObject("InternetExplorer.Application")

objExplorer.Navigate "http://URL"

objExplorer.ToolBar = 0

objExplorer.StatusBar = 0

objExplorer.Width=1000

objExplorer.Height = 700

objExplorer.Left = 0

objExplorer.Top = 0

objExplorer.Visible = 1

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Stratton, Doug ISMC:EX
Sent: December 30, 2008 7:34 PM
To: thin@freelists.org
Subject: [THIN] IE 6 question

Hi,
We want to remove all the menu options from IE 6. I have found some gp settings that remove all but Edit, View, Tools and Help.

Can't figure out how to remove them. Don't want to use the -k kiosk option.

Thanks for any answers.

Regards,
Doug Stratton, Shared Service BC
Service Desk Email: 77000@gov.bc.ca
Service Desk Tel: (250)387-7000

Tuesday, December 30, 2008

[THIN] Re: 100's of XML errors on the WIs

Hi George,

If any of the published applications has a leading or trailing blank space as well as two consecutive spaces in the distinguished name it will generate the error(s) you described.

Email me privately if you have any questions.

Mike

Msg: #1 in digest
From: <GTaylor@rcrh.org>
Date: Tue, 30 Dec 2008 08:43:52 -0700
Subject: [THIN] 100's of XML errors on the WIs

I have 2 Farms that are serviced by 4 load balanced Web Interfaces, they all answer to the same DNS name. One farm is 4.0 with only 4 servers in it, the other is 4.5 with approx. 35 servers. The WI machines are 4.6. I'm seeing the below message in the application logs of each Web Interface every 5 to 10 minutes:

An error of type "IMA" with an Error ID of "0x80000001" was reported by the XML Service at address "http://rus-ctxpress11s:80/scripts/wpnbr.dll [com.citrix.xml.NFuseProtocol.RequestAppData]". This XML Service transaction failed, but the XML Service has not been removed from the list of active services.

There is one of these for every CPS that is listed as an XML broker. I've tried the following on all the CPS servers via Citrix's Tech Support suggestion with no luck, Cleared the IMA Local Host Cache, unregistered XML, reregistered XML on port 80 and restarted it.

I've also done a dscheck /Full Servers before the above steps and had 1 hostID with no corresponding MfServer node entry. After reloading LHC and reregistering XML I get over 30 of them. I haven't done a /clean with it yet.

Any suggestions on where my issues could be? Does it appear my Datastore is corrupt in some way?

Any help or hints would be great.

George Taylor
Systems Programmer
Regional Health Inc.

Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.

Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.

[THIN] IE 6 question

Hi,
We want to remove all the menu options from IE 6. I have found some gp settings that remove all but Edit, View, Tools and Help.

Can't figure out how to remove them. Don't want to use the -k kiosk option.

Thanks for any answers.

Regards,
Doug Stratton, Shared Service BC
Service Desk Email: 77000@gov.bc.ca
Service Desk Tel: (250)387-7000

[THIN] Office 2003 sp3 and updates etc

Good morning,

I have been updating a single citrix server site over the break with hotfixes and patches etc, I have hit a snag running the Office 2003 sp3 and updates etc.

The server has been remapped to M: and the sp / updates for office baulk on cannot find c:\

Has anyone been able to resolve this quite easily?

I checked the sp3 MSI using /? but no mention of being able to specify the destination location, I also tried using subst which also failed.

Have an excellent new year

Regards

Rob

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

If you run filemon you may discover that it's looking for missing files in c:\windows\installer

and yes, why not go with R03?

On Wed, Dec 31, 2008 at 4:39 AM, Berny Stapleton <berny@technology.net.au> wrote:

http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q111019&sliceId=1

2008/12/30 Jez <jezosaurus@gmail.com>

Hi,

I have a site where they are unable to install PSE450W2K3R01.

Product: Citrix Presentation Server for Windows - Update 'PSE450W2K3R01' could not be installed. Error code 1603

We have patched VC++ and are running License Servre 11.5 => prerequisites are fulfilled.

MSI Log stated that the patch could not be installed and failed with error code 1603

Any suggestions as to what to look for, or any recommendations for more recent patches?

TIA,
Jez

[THIN] Another AV survey

I know we do this every so often, but we are reviewing our AV/Malware for the new year. We are a relatively small organisation, 30-odd servers (Backend and TS). We had Norton, made the mistake of moving to Symantec SEP, and are now looking for a simple, effective, low footprint, AV solution.

We are currently inclining to Sophos. Any experience, positive or negative? Or other appropriate suggestions?

Nick

[THIN] CN=Daniel Schoppmann/OU=bebit/O=LNN/C=DE is out of the office.

Ich werde ab 30.12.2008 nicht im Büro sein. Ich kehre zurück am
07.01.2009.

************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] Re: 100's of XML errors on the WIs

Now I've ran a DSCheck /Clean, but the MfServer node entry errors do not go away, do you guys think my Datastore is hosed?

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Carl Stalhood
Sent: Tuesday, December 30, 2008 9:08 AM
To: thin@freelists.org
Subject: [THIN] Re: 100's of XML errors on the WIs

Have you verified this? http://support.citrix.com/article/ctx109392

On Tue, Dec 30, 2008 at 9:43 AM, <GTaylor@rcrh.org> wrote:

I have 2 Farms that are serviced by 4 load balanced Web Interfaces, they all answer to the same DNS name. One farm is 4.0 with only 4 servers in it, the other is 4.5 with approx. 35 servers. The WI machines are 4.6. I'm seeing the below message in the application logs of each Web Interface every 5 to 10 minutes:

An error of type "IMA" with an Error ID of "0x80000001" was reported by the XML Service at address "http://rus-ctxpress11s:80/scripts/wpnbr.dll [com.citrix.xml.NFuseProtocol.RequestAppData]". This XML Service transaction failed, but the XML Service has not been removed from the list of active services.

There is one of these for every CPS that is listed as an XML broker. I've tried the following on all the CPS servers via Citrix's Tech Support suggestion with no luck, Cleared the IMA Local Host Cache, unregistered XML, reregistered XML on port 80 and restarted it.

I've also done a dscheck /Full Servers before the above steps and had 1 hostID with no corresponding MfServer node entry. After reloading LHC and reregistering XML I get over 30 of them. I haven't done a /clean with it yet.

Any suggestions on where my issues could be? Does it appear my Datastore is corrupt in some way?

Any help or hints would be great.

George Taylor
Systems Programmer
Regional Health Inc.

Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.

Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.

Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q111019&sliceId=1

2008/12/30 Jez <jezosaurus@gmail.com>

Hi,

I have a site where they are unable to install PSE450W2K3R01.

Product: Citrix Presentation Server for Windows - Update 'PSE450W2K3R01' could not be installed. Error code 1603

We have patched VC++ and are running License Servre 11.5 => prerequisites are fulfilled.

MSI Log stated that the patch could not be installed and failed with error code 1603

Any suggestions as to what to look for, or any recommendations for more recent patches?

TIA,
Jez

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

Try uninstall any other Citrix patches you have installed and then go to Add/Remove programs and run a repair on Citrix Presentation server. Then try R01 again.

Chris

From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Jez
Sent: December 30, 2008 11:28 AM
To: thin@freelists.org
Subject: [THIN] Hotfix Rollup Pack PSE450W2K3R01 - Won't install

Hi,

I have a site where they are unable to install PSE450W2K3R01.

Product: Citrix Presentation Server for Windows - Update 'PSE450W2K3R01' could not be installed. Error code 1603

We have patched VC++ and are running License Servre 11.5 => prerequisites are fulfilled.

MSI Log stated that the patch could not be installed and failed with error code 1603

Any suggestions as to what to look for, or any recommendations for more recent patches?

TIA,
Jez

[THIN] Hotfix Rollup Pack PSE450W2K3R01 - Won't install

[THIN] Re: 100's of XML errors on the WIs

Thanks for the response. We actually have "Everyone" and "Users" in there, I'm guessing that covers "remote Users"?

George

Have you verified this? http://support.citrix.com/article/ctx109392

On Tue, Dec 30, 2008 at 9:43 AM, <GTaylor@rcrh.org> wrote:

[THIN] Re: 100's of XML errors on the WIs

Have you verified this? http://support.citrix.com/article/ctx109392

On Tue, Dec 30, 2008 at 9:43 AM, <GTaylor@rcrh.org> wrote:

I have 2 Farms that are serviced by 4 load balanced Web Interfaces, they all answer to the same DNS name. One farm is 4.0 with only 4 servers in it, the other is 4.5 with approx. 35 servers. The WI machines are 4.6. I'm seeing the below message in the application logs of each Web Interface every 5 to 10 minutes:

An error of type "IMA" with an Error ID of "0x80000001" was reported by the XML Service at address "http://rus-ctxpress11s:80/scripts/wpnbr.dll [com.citrix.xml.NFuseProtocol.RequestAppData]". This XML Service transaction failed, but the XML Service has not been removed from the list of active services.

There is one of these for every CPS that is listed as an XML broker. I've tried the following on all the CPS servers via Citrix's Tech Support suggestion with no luck, Cleared the IMA Local Host Cache, unregistered XML, reregistered XML on port 80 and restarted it.

I've also done a dscheck /Full Servers before the above steps and had 1 hostID with no corresponding MfServer node entry. After reloading LHC and reregistering XML I get over 30 of them. I haven't done a /clean with it yet.

Any suggestions on where my issues could be? Does it appear my Datastore is corrupt in some way?

Any help or hints would be great.

George Taylor
Systems Programmer
Regional Health Inc.

Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.

Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

[THIN] 100's of XML errors on the WIs

An error of type "IMA" with an Error ID of "0x80000001" was reported by the XML Service at address "http://rus-ctxpress11s:80/scripts/wpnbr.dll [com.citrix.xml.NFuseProtocol.RequestAppData]". This XML Service transaction failed, but the XML Service has not been removed from the list of active services.

There is one of these for every CPS that is listed as an XML broker. I've tried the following on all the CPS servers via Citrix's Tech Support suggestion with no luck, Cleared the IMA Local Host Cache, unregistered XML, reregistered XML on port 80 and restarted it.

I've also done a dscheck /Full Servers before the above steps and had 1 hostID with no corresponding MfServer node entry. After reloading LHC and reregistering XML I get over 30 of them. I haven't done a /clean with it yet.

Any suggestions on where my issues could be? Does it appear my Datastore is corrupt in some way?

Any help or hints would be great.

George Taylor
Systems Programmer
Regional Health Inc.

Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.

Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

Monday, December 29, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Thanks, I've ran MedEvac and dscheck and all seems ok, just de-installed R06
and the PS 4.0 w2k3 farm is functioning normal again... Maybe one server was
corrupting xml traffic, but could not find any clues in the ima store
(dscheck) or via MedEvac.

Thanks for your support!
Andre

> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf Of George Wasgatt
> Sent: woensdag 24 december 2008 16:28
> To: thin@freelists.org
> Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> I too had problems with Web Interface not seeing the published app
> after my
> 4.5 upgrade which included PSE450W2K3R03. Citrix Support had me
> download
> MedEvac which I used to locate a 'damaged' application which was
> causing the
> XML service to send unintelligible information to the Web Interface.
> Once I
> deleted that published application all was well. I was in a mixed 4.0
> / 4.5
> farm at the time which supposedly contributed to this problem. It is
> available here http://support.citrix.com/article/CTX107935
>
> Here is what MedEvac does in its own words:
>
> MedEvac Tool Version 2.5
>
> Created Date: September 20, 2006
>
> Updated Date: September 23, 2008
>
> Description
> -----------
> The MedEvac tool is utilized to run checks against a Presentation
> Server
> farm to verify environment health.
>
> This tool can be used to check the following components of a
> Presentation
> Server Farm:
>
> 1. Verify XML Service Health:
>
> a. Verifies that the XML service is able to respond to an XML,
> Web
> Interface, Program Neighborhood Agent or Program Neighborhood Client
> request.
>
> b. Verifies that the XML brokers are able to contact the Data
> Collector.
>
> 2. Verify Data Collector Health:
>
> a. Verifies Data Collector is able to provide a least loaded
> server
> for the specified application.
>
> b. Verifies IMA Service on the Data Collector is functioning
> properly.
>
> c. Verifies the IMA Service can read the Data Collector's LHC.
>
> d. Verifies that the IMA Service can read its Dynamic Store data.
>
> e. Verifies at least one server in the farm has this application
> published.
>
> 3. Verify least loaded server health:
>
> a. Verifies Term Service on least loaded server.
>
> b. Verifies RPC Service on least loaded server.
>
> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf
> Of christopher.walter@cgi.com
> Sent: Wednesday, December 24, 2008 9:17 AM
> To: thin@freelists.org
> Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> Is your IMA service restarting ok by itself on your data collector and
> did
> you happen to install any packages with IMS before you had this
> problem? It
> almost sounds like the same problem you have when applying R03 for PS
> 4.5 if
> you have corrupted or duplicate jobs only the IMA service would be hung
> after.
>
> What do you get if you run dscheck /full servers
>
> Chris
>
> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf
> Of Bohmer, Andre ten
> Sent: December 24, 2008 2:34 AM
> To: thin@freelists.org
> Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> > As far as the first part of the problem, do you get the same problem
> if
> > you use explicit instead of Autologon?
> We use explicit logon default instead of Autologon.
>
> > For the second part of the problem, what do you get back when you run
> > dscheck? Did you recently add more groups to your ID's. I had a
> > similar problem and we had to do an xml fix to the data collectors in
> > order to process accounts that had more then a certain amount of AD
> > groups...that was with PS 3.0 though.
> No we did not add more groups to all ID's, I use a baseline account and
> that
> did not change but also dos not see all published app's it is granted
> to.
>
> > dscheck
> Data Store Validation Utility. Version: 5.21
>
> Installation Job Information for Unknown Servers
> ------------------------------------------------
> Server 5732 not found for installation job 7cf1-0038-0008513d
> Server 1e74 not found for installation job 7cf1-0038-0008513d
> Server 5732 not found for installation job 7cf1-0038-0004b7fd
> Server 5732 not found for installation job 6157-0038-000d6211
> Server 5732 not found for installation job 6157-0038-000d6272
>
> MSI Installation Job Information for Unknown Servers
> ----------------------------------------------------
> No MSI Installation Job Records Found
>
> ADF Installation Job Information for Unknown Servers
> ----------------------------------------------------
> Finished data store validation.
>
>
> Regards,
> Andre
>
> > -----Original Message-----
> > From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> > Behalf Of Bohmer, Andre ten
> > Sent: December 23, 2008 10:57 AM
> > To: thin@freelists.org
> > Subject: [THIN] After PSE400W2K3R06 : MPSError type="IMA"0x80000032
> >
> > Hi,
> >
> > Tested last week PSE400W2K3R06 on a test server and everything went
> ok
> > so
> > rolled out yesterday PSE400W2K3R06 in production (Windows 2003 SP2 ,
> PS
> > 4.0
> > farm), but now a lot of people only see a few of all published
> > applications
> > they are granted for (via Program Neighborhood client). WebInterface
> > 4.5
> > even does not show any application. Looking at the WI servers I found
> > following error messages:
> >
> > "The XML document sent by the Citrix servers could not be processed
> > because
> > it contains invalid XML. This message was reported from the XML
> Service
> > at
> > address "http://<server ip>:80/scripts/wpnbr.dll
> > http://com.citrix.xml.NFuseProtocol.RequestAppData". This XML Service
> > could
> > not be contacted and will be temporarily removed from the list of
> > active
> > services. Log ID: 2578550e"
> >
> > And detail from networksnif on WI server:
> >
> > </AppData>
> > <AppData>
> > <InName>Exact2;WUR 353</InName>
> > <FName>Exact ;WUR 353</FName>
> > <Details>
> > </Details>
> > <SeqNo>1223897127</SeqNo>
> > <ServerType>win32</ServerType>
> > <ClientType>ica30</ClientType>
> > </AppData>
> > <AppData>
> > <InName>IE</InName>
> > 15c
> >
> > <?xml version="1.0" encoding="UTF-8" ?>
> > <!DOCTYPE NFuseProtocol SYSTEM "NFuse.dtd">
> > <NFuseProtocol version="4.1">
> > <ResponseAppData>;
> > <ErrorId>unspecified</ErrorId>
> > <MPSError type="IMA">0x80000032</MPSError>
> > <BrowserError>0x00000024</BrowserError>
> > </ResponseAppData>
> > </NFuseProtocol>
> >
> > Recreating the local host cache is not working. A restore of the data
> > store
> > before the PSE400W2K3R06 did not work either.
> > Any ideas what is the culprit?
> >
> > Andre
> >
> >
> ______________________________________________________________________
> > This email has been scanned by the MessageLabs Email Security System.
> > For more information please visit http://www.messagelabs.com/email
> >
> ______________________________________________________________________
> > ************************************************
> > For Archives, RSS, to Unsubscribe, Subscribe or
> > set Digest or Vacation mode use the below link:
> > http://www.freelists.org/list/thin
> > Follow ThinList on Twitter
> > http://twitter.com/thinlist
> > Thin List discussion is now available in blog format at:
> > http://thinmaillist.blogspot.com
> > Thinlist MOBILE Feed
> > http://thinlist.net/mobile
> > ************************************************
>
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************
>
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Hi,

All seems to be ok regarding the ima store, ran all kind of checks with dscheck and none 'failed'. Looks like uninstalling R06 is the only option at the moment (http://forums.citrix.com/thread.jspa?threadID=240052&tstart=0).

Andre

-----Original Message-----
From: thin-bounce@freelists.org on behalf of christopher.walter@cgi.com
Sent: Wed 12/24/2008 15:17
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Is your IMA service restarting ok by itself on your data collector and did you happen to install any packages with IMS before you had this problem? It almost sounds like the same problem you have when applying R03 for PS 4.5 if you have corrupted or duplicate jobs only the IMA service would be hung after.

What do you get if you run dscheck /full servers

Chris

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Bohmer, Andre ten
Sent: December 24, 2008 2:34 AM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
We use explicit logon default instead of Autologon.

> For the second part of the problem, what do you get back when you run
> dscheck? Did you recently add more groups to your ID's. I had a
> similar problem and we had to do an xml fix to the data collectors in
> order to process accounts that had more then a certain amount of AD
> groups...that was with PS 3.0 though.
No we did not add more groups to all ID's, I use a baseline account and that
did not change but also dos not see all published app's it is granted to.

> dscheck
Data Store Validation Utility. Version: 5.21

Installation Job Information for Unknown Servers
------------------------------------------------
Server 5732 not found for installation job 7cf1-0038-0008513d
Server 1e74 not found for installation job 7cf1-0038-0008513d
Server 5732 not found for installation job 7cf1-0038-0004b7fd
Server 5732 not found for installation job 6157-0038-000d6211
Server 5732 not found for installation job 6157-0038-000d6272

MSI Installation Job Information for Unknown Servers
----------------------------------------------------
No MSI Installation Job Records Found

ADF Installation Job Information for Unknown Servers
----------------------------------------------------
Finished data store validation.

Regards,
Andre

> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf Of Bohmer, Andre ten
> Sent: December 23, 2008 10:57 AM
> To: thin@freelists.org
> Subject: [THIN] After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> Hi,
>
> Tested last week PSE400W2K3R06 on a test server and everything went ok
> so
> rolled out yesterday PSE400W2K3R06 in production (Windows 2003 SP2 , PS
> 4.0
> farm), but now a lot of people only see a few of all published
> applications
> they are granted for (via Program Neighborhood client). WebInterface
> 4.5
> even does not show any application. Looking at the WI servers I found
> following error messages:
>
> "The XML document sent by the Citrix servers could not be processed
> because
> it contains invalid XML. This message was reported from the XML Service
> at
> address "http://<server ip>:80/scripts/wpnbr.dll
> http://com.citrix.xml.NFuseProtocol.RequestAppData". This XML Service
> could
> not be contacted and will be temporarily removed from the list of
> active
> services. Log ID: 2578550e"
>
> And detail from networksnif on WI server:
>
> </AppData>
> <AppData>
> <InName>Exact2;WUR 353</InName>
> <FName>Exact ;WUR 353</FName>
> <Details>
> </Details>
> <SeqNo>1223897127</SeqNo>
> <ServerType>win32</ServerType>
> <ClientType>ica30</ClientType>
> </AppData>
> <AppData>
> <InName>IE</InName>
> 15c
>
> <?xml version="1.0" encoding="UTF-8" ?>
> <!DOCTYPE NFuseProtocol SYSTEM "NFuse.dtd">
> <NFuseProtocol version="4.1">
> <ResponseAppData>;
> <ErrorId>unspecified</ErrorId>
> <MPSError type="IMA">0x80000032</MPSError>
> <BrowserError>0x00000024</BrowserError>
> </ResponseAppData>
> </NFuseProtocol>
>
> Recreating the local host cache is not working. A restore of the data
> store
> before the PSE400W2K3R06 did not work either.
> Any ideas what is the culprit?
>
> Andre
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://www.freelists.org/list/thin
Follow ThinList on Twitter
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
Thinlist MOBILE Feed
http://thinlist.net/mobile
************************************************

Saturday, December 27, 2008

[THIN] New Free App - TSTaskman

Dear All

Happy holidays.

Another handy little utility from the house of Ctrl-Alt-Del IT Consultancy. As always download it for
free from http://www.ctrl-alt-del.com.au/CAD_TSUtils.htm

TSTaskman is a standalone Windows GUI tool designed to show a user the list of processes running
in their Terminal Server session only. Processes can then be terminated by the user by selecting
the process and pressing the terminate button.

This utility was written for the purpose of allowing users to terminate frozen programs or processes
that exist only in the Terminal Server Session of the currently logged in user. The GUI lists all the
running processes in the Terminal Session of the logged on user, and does not display any other
user or system processes. This allows TSTaskman to be presented as an application on the user
desktop or as a published application, giving the user the ability to manage frozen applications
within a Terminal Server session, should they occur. After correct user training of TSTaskman, help
desk calls can be significantly reduced by allowing users to terminate unresponsive applications,
without the concerns that the user can terminate other processes not running in their session.

Although written for Terminal Server and Citrix environments, this application will function on non-
TS/Citrix workstations and servers. This application has been tested on the following platforms:

Windows 2003 Server SP1
Windows 2003 Server SP1 w/ Citrix PS 4.0
Windows 2003 Server SP1 (Terminal Server Application Mode)
Windows 2000 Server SP4
Windows 2000 Server SP4 w/ Citrix MF XP
Windows 2000 Server SP4 (Terminal Server Application Mode)
Windows 2000 Server SP4 w/ Citrix MF 1.8
Windows XP Professional (domain member)

This utility is FREEWARE and was written by Warren Simondson of
Ctrl-Alt-Del IT Consultancy, Australia. www.ctrl-alt-del.com.au

The freeware version is offered AS IS. Ctrl-Alt-Del IT Consultancy has made every effort possible
to ensure that TSTaskman is free of any bugs or errors, however in no way is TSTaskman to be
considered error or bug free. You assume all responsibility for any damages or lost data that may
result from any errors or bugs in TSTaskman.

IN NO EVENT WILL CTRL-ALT-DEL IT CONSULTANCY BE LIABLE TO YOU FOR ANY
GENERAL,SPECIAL, INDIRECT, CONSEQUENTIAL,
INCIDENTAL OR OTHER DAMAGES ARISING OUT OF THIS PRODUCT.

--
Warren Simondson

Ctrl-Alt-Del IT Consultancy Pty Ltd

Website: http://www.ctrl-alt-del.com.au

Wednesday, December 24, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

I too had problems with Web Interface not seeing the published app after my
4.5 upgrade which included PSE450W2K3R03. Citrix Support had me download
MedEvac which I used to locate a 'damaged' application which was causing the
XML service to send unintelligible information to the Web Interface. Once I
deleted that published application all was well. I was in a mixed 4.0 / 4.5
farm at the time which supposedly contributed to this problem. It is
available here http://support.citrix.com/article/CTX107935

Here is what MedEvac does in its own words:

MedEvac Tool Version 2.5

Created Date: September 20, 2006

Updated Date: September 23, 2008

Description
-----------
The MedEvac tool is utilized to run checks against a Presentation Server
farm to verify environment health.

This tool can be used to check the following components of a Presentation
Server Farm:

1. Verify XML Service Health:

a. Verifies that the XML service is able to respond to an XML, Web
Interface, Program Neighborhood Agent or Program Neighborhood Client
request.

b. Verifies that the XML brokers are able to contact the Data
Collector.

2. Verify Data Collector Health:

a. Verifies Data Collector is able to provide a least loaded server
for the specified application.

b. Verifies IMA Service on the Data Collector is functioning
properly.

c. Verifies the IMA Service can read the Data Collector's LHC.

d. Verifies that the IMA Service can read its Dynamic Store data.

e. Verifies at least one server in the farm has this application
published.

3. Verify least loaded server health:

a. Verifies Term Service on least loaded server.

b. Verifies RPC Service on least loaded server.

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf
Of christopher.walter@cgi.com
Sent: Wednesday, December 24, 2008 9:17 AM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Is your IMA service restarting ok by itself on your data collector and did
you happen to install any packages with IMS before you had this problem? It
almost sounds like the same problem you have when applying R03 for PS 4.5 if
you have corrupted or duplicate jobs only the IMA service would be hung
after.

What do you get if you run dscheck /full servers

Chris

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf
Of Bohmer, Andre ten
Sent: December 24, 2008 2:34 AM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
We use explicit logon default instead of Autologon.

> dscheck
Data Store Validation Utility. Version: 5.21

MSI Installation Job Information for Unknown Servers
----------------------------------------------------
No MSI Installation Job Records Found

ADF Installation Job Information for Unknown Servers
----------------------------------------------------
Finished data store validation.

Regards,
Andre

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Is your IMA service restarting ok by itself on your data collector and did you happen to install any packages with IMS before you had this problem? It almost sounds like the same problem you have when applying R03 for PS 4.5 if you have corrupted or duplicate jobs only the IMA service would be hung after.

What do you get if you run dscheck /full servers

Chris

> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
We use explicit logon default instead of Autologon.

> dscheck
Data Store Validation Utility. Version: 5.21

MSI Installation Job Information for Unknown Servers
----------------------------------------------------
No MSI Installation Job Records Found

ADF Installation Job Information for Unknown Servers
----------------------------------------------------
Finished data store validation.

Regards,
Andre

[THIN] Martin Fischer ist außer Haus / is out of the office

Ich bin ab 24.12.2008 außer Haus und ab 14.01.2009 wieder im Büro.
I'm out of the office from 24.12.2008 and will be back on 14.01.2009.

Gerne werde ich Ihre Nachricht nach meiner Rückkehr beantworten.

In dringenden Fällen bitte ein mail an wi-b-wts@generali.at.

Mit freundlichen Grüßen
Martin Fischer
______________________________________

After my return I will be glad to answer to your message.

In urgent cases send mail to wi-b-wts@generali.at.

Best regards
Martin FischerŠÀÈb½ëI+hR{.nÇ+‰·'¹»®&Þ¢»´8 zËhVœjØ¨žjzë¶›zZ0–)ä†Ûiÿü0ÁúÞzX¬¶Ê+ƒùb²ßí†)Å¢YhÁ8bœ¸¬¶‰ÓÂ+mz¸m¶Ÿÿ·µêÜ¢oí†)åŠËS†)ËŠË]ŠÇ.²È¨ž+'£¯j)ZnW¢¹hú+™«Z¶m§ÿí†)æj)eŠË[–ˆ,¦&lsqauo;\¢dáŠyb²Ó‚Äç†ÛiÿûaŠyb²ÙÞ·ù¨n)^

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
We use explicit logon default instead of Autologon.

> For the second part of the problem, what do you get back when you run
> dscheck? Did you recently add more groups to your ID's. I had a
> similar problem and we had to do an xml fix to the data collectors in
> order to process accounts that had more then a certain amount of AD
> groups...that was with PS 3.0 though.
No we did not add more groups to all ID's, I use a baseline account and that
did not change but also dos not see all published app's it is granted to.

> dscheck
Data Store Validation Utility. Version: 5.21

MSI Installation Job Information for Unknown Servers
----------------------------------------------------
No MSI Installation Job Records Found

ADF Installation Job Information for Unknown Servers
----------------------------------------------------
Finished data store validation.

Regards,
Andre

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

> Forgot the obvious, can you telnet to your XML port on your data
> collector, assuming you are using port 80. Is it sharing with IIS?
> Have you looked at your Web Interface and made sure your config still
> set to pointing to the correct XML servers?
Thanks, indeed did a check on all that (no sharing with IIS and config is
still correct), nothing has changed only the fact w've rolled out
PSE400W2K3R06 on the Citrix servers.

Andre

>
> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf Of christopher.walter@cgi.com
> Sent: December 23, 2008 2:57 PM
> To: thin@freelists.org
> Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> As far as the first part of the problem, do you get the same problem if
> you use explicit instead of Autologon?
>
> For the second part of the problem, what do you get back when you run
> dscheck? Did you recently add more groups to your ID's. I had a
> similar problem and we had to do an xml fix to the data collectors in
> order to process accounts that had more then a certain amount of AD
> groups...that was with PS 3.0 though.
>
> Chris
>
> -----Original Message-----
> From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On
> Behalf Of Bohmer, Andre ten
> Sent: December 23, 2008 10:57 AM
> To: thin@freelists.org
> Subject: [THIN] After PSE400W2K3R06 : MPSError type="IMA"0x80000032
>
> Hi,
>
> Tested last week PSE400W2K3R06 on a test server and everything went ok
> so
> rolled out yesterday PSE400W2K3R06 in production (Windows 2003 SP2 , PS
> 4.0
> farm), but now a lot of people only see a few of all published
> applications
> they are granted for (via Program Neighborhood client). WebInterface
> 4.5
> even does not show any application. Looking at the WI servers I found
> following error messages:
>
> "The XML document sent by the Citrix servers could not be processed
> because
> it contains invalid XML. This message was reported from the XML Service
> at
> address "http://<server ip>:80/scripts/wpnbr.dll
> http://com.citrix.xml.NFuseProtocol.RequestAppData". This XML Service
> could
> not be contacted and will be temporarily removed from the list of
> active
> services. Log ID: 2578550e"
>
> And detail from networksnif on WI server:
>
> </AppData>
> <AppData>
> <InName>Exact2;WUR 353</InName>
> <FName>Exact ;WUR 353</FName>
> <Details>
> </Details>
> <SeqNo>1223897127</SeqNo>
> <ServerType>win32</ServerType>
> <ClientType>ica30</ClientType>
> </AppData>
> <AppData>
> <InName>IE</InName>
> 15c
>
> <?xml version="1.0" encoding="UTF-8" ?>
> <!DOCTYPE NFuseProtocol SYSTEM "NFuse.dtd">
> <NFuseProtocol version="4.1">
> <ResponseAppData>;
> <ErrorId>unspecified</ErrorId>
> <MPSError type="IMA">0x80000032</MPSError>
> <BrowserError>0x00000024</BrowserError>
> </ResponseAppData>
> </NFuseProtocol>
>
> Recreating the local host cache is not working. A restore of the data
> store
> before the PSE400W2K3R06 did not work either.
> Any ideas what is the culprit?
>
> Andre
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************
>
> ______________________________________________________________________
> This email has been scanned by the MessageLabs Email Security System.
> For more information please visit http://www.messagelabs.com/email
> ______________________________________________________________________
> ************************************************
> For Archives, RSS, to Unsubscribe, Subscribe or
> set Digest or Vacation mode use the below link:
> http://www.freelists.org/list/thin
> Follow ThinList on Twitter
> http://twitter.com/thinlist
> Thin List discussion is now available in blog format at:
> http://thinmaillist.blogspot.com
> Thinlist MOBILE Feed
> http://thinlist.net/mobile
> ************************************************

Tuesday, December 23, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Forgot the obvious, can you telnet to your XML port on your data collector, assuming you are using port 80. Is it sharing with IIS? Have you looked at your Web Interface and made sure your config still set to pointing to the correct XML servers?

Chris

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of christopher.walter@cgi.com
Sent: December 23, 2008 2:57 PM
To: thin@freelists.org
Subject: [THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

As far as the first part of the problem, do you get the same problem if you use explicit instead of Autologon?

For the second part of the problem, what do you get back when you run dscheck? Did you recently add more groups to your ID's. I had a similar problem and we had to do an xml fix to the data collectors in order to process accounts that had more then a certain amount of AD groups...that was with PS 3.0 though.

Chris

-----Original Message-----
From: thin-bounce@freelists.org [mailto:thin-bounce@freelists.org] On Behalf Of Bohmer, Andre ten
Sent: December 23, 2008 10:57 AM
To: thin@freelists.org
Subject: [THIN] After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Hi,

Tested last week PSE400W2K3R06 on a test server and everything went ok so
rolled out yesterday PSE400W2K3R06 in production (Windows 2003 SP2 , PS 4.0
farm), but now a lot of people only see a few of all published applications
they are granted for (via Program Neighborhood client). WebInterface 4.5
even does not show any application. Looking at the WI servers I found
following error messages:

"The XML document sent by the Citrix servers could not be processed because
it contains invalid XML. This message was reported from the XML Service at
address "http://<server ip>:80/scripts/wpnbr.dll
http://com.citrix.xml.NFuseProtocol.RequestAppData". This XML Service could
not be contacted and will be temporarily removed from the list of active
services. Log ID: 2578550e"

And detail from networksnif on WI server:

</AppData>
<AppData>
<InName>Exact2;WUR 353</InName>
<FName>Exact ;WUR 353</FName>
<Details>
</Details>
<SeqNo>1223897127</SeqNo>
<ServerType>win32</ServerType>
<ClientType>ica30</ClientType>
</AppData>
<AppData>
<InName>IE</InName>
15c

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE NFuseProtocol SYSTEM "NFuse.dtd">
<NFuseProtocol version="4.1">
<ResponseAppData>;
<ErrorId>unspecified</ErrorId>
<MPSError type="IMA">0x80000032</MPSError>
<BrowserError>0x00000024</BrowserError>
</ResponseAppData>
</NFuseProtocol>

Recreating the local host cache is not working. A restore of the data store
before the PSE400W2K3R06 did not work either.
Any ideas what is the culprit?

Andre

ThinList Blog

Wednesday, December 31, 2008

[THIN] Re: 100's of XML errors on the WIs

[THIN] Re: Office 2003 sp3 and updates etc

[THIN] Re: Office 2003 sp3 and updates etc

[THIN] Re: IE 6 question

Tuesday, December 30, 2008

[THIN] Re: 100's of XML errors on the WIs

[THIN] IE 6 question

[THIN] Office 2003 sp3 and updates etc

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

[THIN] Another AV survey

[THIN] CN=Daniel Schoppmann/OU=bebit/O=LNN/C=DE is out of the office.

[THIN] Re: 100's of XML errors on the WIs

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

[THIN] Re: Hotfix Rollup Pack PSE450W2K3R01 - Won't install

[THIN] Hotfix Rollup Pack PSE450W2K3R01 - Won't install

[THIN] Re: 100's of XML errors on the WIs

[THIN] Re: 100's of XML errors on the WIs

[THIN] 100's of XML errors on the WIs

Monday, December 29, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Saturday, December 27, 2008

[THIN] New Free App - TSTaskman

Wednesday, December 24, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

[THIN] Martin Fischer ist außer Haus / is out of the office

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

Tuesday, December 23, 2008

[THIN] Re: After PSE400W2K3R06 : MPSError type="IMA"0x80000032

About Me

Blog Archive